Attaching The Sensor Head - Panasonic HG-S Series User Manual

3-2 Attaching the Sensor Head

● Sensor head accessories
Sensor head fastening wrench
10mm type
Air-driven type
1.
Open a hole in the housing in which the sensor head will be mounted.
Housing thickness
2.
nsert the sensor head into the hole you opened in the housing, and fasten provisionally
with the provided mounting nut. The mounting direction of the mounting nut differs accord-
ing to the thickness of the housing. For the mounting direction, see the table below.
Mounting nut (accessory)
© Panasonic Industrial Devices SUNX Co., Ltd. 2019
32mm/50mm type
Mounting hole
HG-S1010(R), HG-S1110(R)
HG-S1010-AC, HG-S1110-AC
HG-S1032
HG-S1050
Mounting bolt / threaded
part facing down
Housing
HG-S1010(R), HG-S1110(R)
HG-S1010-AC, HG-S1110-AC
HG-S1032
HG-S1050
INSTALLATION AND CONNECTIONS
Mounting nut
Housing thickness
ø8H7
ø12H7
Mounting bolt / threaded
Housing thickness
Housing
Thread
threaded part facing
down
6.5 to 10mm
6.5 to 8.5mm
Mounting hole
mm 6.5 to 12.5mm
+0.015
0
6.5 to 10.5mm
mm
+0.018
0
6.5 to 12.5mm
part facing up
Housing thickness
Thread
Housing thickness
threaded part facing
up
10 to 12.5mm
8.5 to 10.5mm
8.5 to 12.5mm
3-3