Panasonic HG-S Series User Manual page 18

BEFORE USING THIS PRODUCT
● Digital display / operation unit
19
Name
Output 1 indicator (Orange)
1
2 Output 2 indicator (Orange)
3 Output 3 indicator (Orange)
4 Circle meter (Orange, Green)
5 Digital display / SUB (Green) Shows the setting item. The item set using display switching mode appears.
6 Digital display / MAIN (White) Shows the judgment value and setting data.
7 Guide mark / arrow key (White) Lights up when the LEFT / RIGHT / UP / DOWN key is enabled while configuring settings.
Guide mark / ENT (White)
8
LEFT key
9
10 UP key
11 RIGHT key
12 DOWN key
13 ENTER key
14 EXIT key
15 Status mark
16 Copy checkmark (Orange)
17 Input indicator (White)
18 Preset indicator (Green)
19 Preset key
2-8
1 2 3 4
18 17 16
Lights up when output 1 is ON.
Lights up when output 2 is ON.
Lights up when output 3 is ON.
• Shows increases / decreases of the judgment value by meter display.
• The lowest two gradations show the LOW judgment, and the highest two
gradations show the HIGH judgment.
• Green lights up when the judgment is GO. Orange lights up when the judgment is LOW / HIGH.
• When the HIGH setting is set to a lower value than the LOW setting, all indicators turn OFF.
• To show the count, long-press the LEFT / RIGHT / UP / DOWN key for 2
seconds in the base screen.
• The number of setting items in the level lights up, and the order of the set-
ting times is shown by blinking.
Lights up when the ENTER key is enabled while configuring settings.
• Use to change setting items and settings when configuring settings, and to
move through set value digits.
• Long-press for 2 seconds in the base screen to enter teaching mode.
• Use to change setting items when configuring settings, and to change numeric set values.
• Long-press for 2 seconds in the base screen to enter display switching mode.
• Short-press in the base screen to finely adjust the HIGH set value.
• Use to change setting items and settings when configuring settings, and to
move through set value digits.
• Long-press for 2 seconds in the base screen to enter setting mode.
• Use to change setting items when selecting settings, and to change numeric set values.
• Long-press for 2 seconds in the base screen to enter bank mode.
• Short-press in the base screen to finely adjust the LOW set value.
• Use to select setting items and finalize settings when configuring settings.
• Long-press for 3 seconds together with the EXIT key in the base screen to
activate or cancel key lock.
• Use to exit a setting item or cancel a setting when configuring settings.
• Long-press for 3 seconds together with the ENTER key in the base screen
to activate or cancel key lock.
Lights up while the trigger input (external input) is ON.
TRIG (White)
Lights up during sampling when self-hold is set.
HOLD (White) Lights up while the judgment value is held.
CALC (White) Lights up when set to calculation mode with a slave unit connected.
When configuring master unit settings, "COPY" lights up for setting items
that can be copied to slave units. A checkmark lights up for items selected
for copying, and the settings are copied when copying is executed.
Lights up when external input 1, 2, or 3 is ON.
Lights up when the preset function is used.
When short-pressed in the base screen, the preset function turns ON.
When long-pressed for 2 seconds in the base screen, the preset function turns OFF.
5 6 7 8
15
© Panasonic Industrial Devices SUNX Co., Ltd. 2019
9 10 11 12
14 13
Function