Specifications - Panasonic HG-S Series User Manual

Type
NPN output
Model No.
PNP output
Response time
Output 1 indicator
Output 2 indicator
Output 3 indicator
Input indicator
Preset indicator
Display
Display resolution
Display range
Protection
Contamination level
Ambient temperature
Ambient humidity
Elevation
Insulation resistance
Withstand voltage
Vibration resistance
Shock resistance
Material
Cable
Weight (main unit only)
Standards
Notes: 1) Measured at a supply voltage of +24V DC and an ambient temperature of +20°C, unless otherwise indicated.
2) Current consumption does not include analog current output.
3) Linearity F.S. = 16mA, and is linearity with respect to digitally measured values.
4) When slave units are connected to the master unit, the maximum sink current / source current of the
control output and ambient temperature vary depending on the number of connected slave units as
shown below.
Number of connected slave units
1 to 7 units
8 to 15 units
5) Do not use or store in an environment that has been pressurized to an air pressure higher than the at-
mospheric pressure at 0m.
© Panasonic Industrial Devices SUNX Co., Ltd. 2019
Master unit
High-performance type
HG-SC101
HG-SC101-P
3ms, 5ms, 10ms, 100ms, 500ms, 1,000ms switching type
Orange LED (lights up when output 1 is ON)
Orange LED (lights up when output 2 is ON)
Orange LED (lights up when output 3 is ON)
Green LED (lights up when preset is used)
Circle meter: Orange / Green LCD, Copy checkmark: Orange LCD
Digital display / MAIN: White LCD, Digital display / SUB: Green LCD
Guide mark / arrow key: White LCD, Guide mark / ENT: White LCD
Status mark / TRIG: White LCD, Status mark / HOLD: White LCD
Status mark / CALC: White LCD
-10 to +50°C (No dew condensation or icing allowed) (Note 4), Storage: -20 to +60°C
20MΩ or higher, using 250V DC megger connected between all supply terminals and case
1,000V AC for one minute between all supply terminals and case
10 to 150Hz with 0.75mm amplitude, maximum acceleration 49m/s
in X, Y and Z directions for two hours each
2
98m/s (approx. 10G) in X, Y and Z directions 5 times each
Case: Polycarbonate, Cover: Polycarbonate, Switches: Polyacetal
2
0.2mm 2-conductor
(brown and blue lead 0.15mm
2
w i r e s ) / 0 . 1 5 m m tor 2m composite
7-conductor 2m com- cable
posite cable
Approx. 140g
When communication
unit consolidated
1 to 6 units
7 to 14 units
HG-SC111
HG-SC111-P
White LED (lights up when input is ON)
0.1μm
-199.9999 to 199.9999mm
IP40 (IEC)
2
35 to 85% RH, Storage: 35 to 85% RH
2,000m or less (Note 5)
2
7-conduc- 0.15mm
tor 2m composite
cable
Approx. 140g
EMC Directive
Maximum sink current / source
current of control output
20mA
10mA

SPECIFICATIONS

Slave unit
Standard type Wire-saving type
HG-SC112
HG-SC112-P
2
6-conduc-
Approx. 130g Approx. 60g
Ambient temperature
-10 to +45°C
HG-SC113
2
―
6-3