FUNCTION SETTINGS
5-4 Calculation Settings (
Structure of calculation settings menu
●
Long-press for 2 seconds
You can perform calculation processing based on the measured values of each of the connect-
ed controllers, and display the judgment result on the master unit's display or output the judg-
ment result from the master unit.
<Reference>
● A slave unit must be connected to the master unit when configuring the calculation settings.
If a slave unit is not connected, "Calculation Mode" and "Calculation Application Selection" will
not appear.
● The calculation setting menu only appears on the master unit.
5-76
) (Master Unit Only)
[Calculation mode]
[Calculation application selection]
© Panasonic Industrial Devices SUNX Co., Ltd. 2019