Panasonic HG-S Series User Manual page 26

INSTALLATION AND CONNECTIONS
3.
Insert the wire firmly into the wire insertion hole. Make sure that the jacketed part of the
wire has entered the wire insertion hole and the tips of the core wires have passed through
the connection part as shown below.
1
2
3
4
5
6
4.
Insert the tip of the flat-head screwdriver into the release hole so that it contacts the bottom
of the lever (white), and move the tip of the flat-head screwdriver up. The lever (white) will
make a "click" sound when it returns to its original position, and the wire will be locked.
5.
Pull on the wire gently to ensure that it does not come out.
6.
Slide the protective cover in the direction of the arrow to return the cover to its original position.
3-6
Jacketed part of wire
Connection part
Terminal No. Connection cable
1
2
3
4
5
6
Release hole
Wire insertion hole
Core wire tip
Red
―
White
Green
―
Black
Lever (white)
© Panasonic Industrial Devices SUNX Co., Ltd. 2019