Panasonic HG-S Series User Manual page 179

SPECIFICATIONS
Notes: 1) Measured at an ambient temperature of +20°C unless otherwise specified.
2) In the case of low measurement force type (HG-S1010R / HG-S1110R), measurements were obtained
with products in standard configuration without rubber bellows.
3) Typical value near center of measurement.
4) Excludes damage and deterioration to rubber bellows due to external causes.
5) Typical value in a clean environment with no contact with dust or liquids such as water and oil.
6) Connect to an HG-SC series controller manufactured in February 2019 or later.
© Panasonic Industrial Devices SUNX Co., Ltd. 2019 6-5