Panasonic HG-S Series User Manual page 153

■ Average Value (
This application calculates the average value of the measured values of the master unit and
slave units.
Slave
unit 1
Master
unit
• None of the connected slave units output the judgment result. (Always OFF)
• All sensor head indicators show the judgment result of the master unit.
• The response time for judgment output is the response time setting on the master unit and
slave units plus 3ms.
■ Standard Difference (
This application calculates the difference between the measured value of each slave unit and
the master unit.
With this application, each slave unit outputs the judgment result.
Slave
unit 1
Master
unit
• The master unit performs judgment as a separate unit that does not perform calculation.
• The hold function cannot be used on the master unit.
• The response time for judgment output is the response time setting on the master unit and
slave units plus 3ms.
© Panasonic Industrial Devices SUNX Co., Ltd. 2019
)
Slave
unit 2
([Master unit] + [Slave unit 1] + ... + [Slave unit n]) ÷
(1+n) is calculated value of master unit.
"n" is the number of slave units
)
Slave
unit 2
(Measured value of "slave unit 2" - Measured value of
"master unit") is calculated value of master unit.
FUNCTION SETTINGS
5-81