Preset Data Selection - Panasonic HG-S Series User Manual

5-2-7 Preset Data Selection (

When using a preset, you can select the target data (NORM. V or JUDGE.V).
You can select "Judgment value (JUDGE.V)" to use the held value as the preset.
Preset data selection
Judgment value (JUDGE.V)
Normal measured value
(NORM.V)
<Reference>
● When a calculation function is used ("standard difference" on the master unit, or a mode other
than "standard difference" on the slave unit), the setting cannot be changed.
● If a calculation function ("standard difference" on the master unit, or a mode other than "stan-
dard difference" on the slave unit) is set after preset data selection is set to "Judgment value
(JUDGE.V)", the preset data will be the normal measured value (NORM.V).
Setting method
Long-press for 2 seconds
Setting item
Preset data selection (PR.OBJ)
© Panasonic Industrial Devices SUNX Co., Ltd. 2019
)
The judgment value (JUDGE.V) is used as the preset value.
The normal measured value (NORM.V) is used as the preset value.
CALC: Only appears on master unit
Normal measured value (NORM.V)
Judgment value (JUDGE.V)
FUNCTION SETTINGS
Function
: Select
: Finalize
Set values Default value
NORM.V
5-19