Laser And Led Safety Guidelines And Warnings; Laser Safety Warnings For Class 1M Juniper Networks Devices; General Laser Safety Guidelines - Juniper TCX1000-RDM20 Hardware Manual

Programmable roadm
Hide thumbs Also See for TCX1000-RDM20:
Table of Contents

Advertisement

CHAPTER 29
Laser and LED Safety Guidelines and
Warnings

Laser Safety Warnings for Class 1M Juniper Networks Devices

General Laser Safety Guidelines

Copyright © 2019, Juniper Networks, Inc.
Laser Safety Warnings for Class 1M Juniper Networks Devices on page 167
Juniper Networks devices are equipped with laser transmitters, which are considered a
Class 1 Laser Product by the U.S. Food and Drug Administration and are evaluated as a
Class 1 Laser Product per EN 60825-1 requirements.
Observe the following guidelines and warnings:
General Laser Safety Guidelines on page 167
Class 1M Laser Product Warning on page 168
Class 1 LED Product Warning on page 168
Laser Beam Warning on page 168
When working around ports that support optical transceivers, observe the following
safety guidelines to prevent eye injury:
Do not look into unterminated ports or at fibers that connect to unknown sources.
Do not examine unterminated optical ports with optical instruments.
Avoid direct exposure to the beam.
WARNING:
Unterminated optical connectors can emit invisible laser
radiation. The lens in the human eye focuses all the laser power on the
retina, so focusing the eye directly on a laser source—even a low-power
laser—could permanently damage the eye.
167

Advertisement

Table of Contents
loading

Table of Contents