Table of Contents
Advertisement
Packing a TCX1000-RDM20 for Shipping
Packing TCX1000-RDM20 Components for Shipping
Copyright © 2019, Juniper Networks, Inc.
To pack a TCX1000-RDM20 for shipping:
Power off the TCX1000-RDM20 and remove the power cables. See
1.
TCX1000-RDM20" on page
Remove the cables that connect the TCX1000-RDM20 to all external devices. See
2.
"Disconnecting a Fiber-Optic Cable from a TCX1000 Device" on page
Remove all field-replaceable units (FRUs) from the device. See:
3.
Removing a Fan Module from a TCX1000-RDM20 on page 117
Removing a Power Supply from a TCX1000-RDM20 on page 121
Remove the TCX1000-RDM20 from the rack or cabinet. See
4.
TCX1000-RDM20 from a Rack or Cabinet" on page
Return accessories or FRUs with the TCX1000-RDM20, by packing them as instructed
5.
in
"Packing a TCX1000-RDM20 Chassis or Component for Shipping" on page
Place the TCX1000-RDM20 in an antistatic bag.
6.
Place the TCX1000-RDM20 in the shipping carton.
7.
Place the packing foam on top of and around the TCX1000-RDM20.
8.
Close the top of the cardboard shipping box and seal it with packing tape.
9.
Write the Return Materials Authorization (RMA) number on the exterior of the box to
10.
ensure proper tracking. See
Inc." on page 145
for instructions on obtaining an RMA number.
CAUTION:
Do not stack TCX1000-RDM20 components. Return individual
components in separate boxes if they do not fit together on one level in the
shipping box.
To pack and ship TCX1000-RDM20 components:
Place individual FRUs in antistatic bags.
1.
Ensure that the components are adequately protected with packing materials and
2.
packed so that the pieces are prevented from moving around inside the carton.
Chapter 26: Packing and Returning Components
129.
130.
"Returning a Hardware Component to Juniper Networks,
"Powering Off a
125.
"Removing a
146.
147
Advertisement
Table of Contents
Troubleshooting
