Table of Contents
Advertisement
TCX1000 Programmable ROADM Hardware Guide
Mounting the TCX1000-RDM20
64
Depending on the rack you plan to use, select the appropriate bracket size to fit the frame
on a four-post or two-post frame. See
brackets that are shipped with the chassis.
Figure 18: Types of Brackets
NOTE:
The 19-in. front and rear brackets are attached to the
TCX1000-RDM20 when they are shipped. If you want to attach the 21-in. or
23-in. brackets, unscrew the 19-in. brackets from the chassis, and attach the
21-in. or 23-in. brackets by using the same screws.
NOTE:
This procedure requires two persons. Do not attempt to do it alone.
To mount the TCX1000-RDM20 on four posts in a rack using the 19-in. mounting brackets,
follow these steps:
Figure 18 on page 64
for the different types of
Copyright © 2019, Juniper Networks, Inc.
Advertisement
Table of Contents
Troubleshooting
