Connecting The Tcx1000-Rdm20 To The Network And External Devices - Juniper TCX1000-RDM20 Hardware Manual

Related
Documentation

Connecting the TCX1000-RDM20 to the Network and External Devices

Related
Documentation
Copyright © 2019, Juniper Networks, Inc.
Figure 28: Connecting the TCX1000-RDM20 Directly to a Management Console
Figure 29: Connecting the TCX1000-RDM20 to a Management Console Through a Console
Server
Console Port Connector Pinouts for the TCX1000-RDM20 on page 55
The Juniper Networks TCX1000-RDM20 provides bidirectional dense wavelength-division
multiplexing (DWDM) C-band amplification, channel-level power control, and channel
multiplexing functionality. The 20 uiniversal ports can connect to other TCX1000-RDM20s,
to the FMD96, or to compatible DWDM PICs or MICs. The line ports connect to the optical
line system, such as another ROADM or an inline amplifier (TCX1000-ILA). The monitor
ports allow you to monitor the output of the amplification stage for signals coming in
and launching out on the line ports. The SFP provides OSC-band signal transmit and
receive functionality for a bidirectional optical link. The TCX1000-RDM20 includes optical
filters to support an OSC-band at either 1511 nm or 1611 nm wavelength (1611 nm
wavelength is not used at this time).
The OSC signal provides Ethernet network connectivity between TCX1000-RDM20 nodes.
For detailed information on network requirements and configuration examples on how
to deploy the TCX1000-RDM20, see the TCX Series Optical Transport System Feature
Guide.
For information on network requirements and high availability (HA), see the proNX Optical
Director Installation Guide.
TCX1000-RDM20 Description on page 3
Console Port Connector Pinouts for the TCX1000-RDM20 on page 55
Connecting a Fiber-Optic Cable to a TCX1000 Device on page 126
Chapter 14: Connecting the TCX1000-RDM20 to External Devices
81