Tcx1000-Rdm20 Hardware Component Overview - Juniper TCX1000-RDM20 Hardware Manual

Related
Documentation

TCX1000-RDM20 Hardware Component Overview

Table 3: TCX1000-RDM20 Hardware Models
Model Number
TCX1000-RDM20-AC
TCX1000-RDM20-DC
Table 4: TCX1000-RDM20 Software Licenses
Model Number
TCX1000-RDM-2P-UP
Copyright © 2019, Juniper Networks, Inc.
Figure 2: TCX1000-RDM20 FRU Panel
1— Fan modules
2—Grounding point
The cooling system in a TCX1000-RDM20 consists of two fan modules. These fan modules
can be hot-swapped—you do not need to power off the TCX1000-RDM20 or disrupt the
functioning of the TCX1000-RDM20 to replace a fan module. The TCX1000-RDM20 has
two 650-W power supplies, either AC or DC depending on your configuration. The power
supplies can be AC or DC. Only one power supply is required to power the device, while
the second power supply provides redundancy.
TCX1000-2D8CMD Description on page 105
TCX1000-RDM20 Cooling System Description on page 17
TCX1000-RDM20 AC Power Supply Description on page 21
TCX1000-RDM20 DC Power Supply Description on page 22
Table 3 on page 5 describes the TCX1000-RDM20 hardware models.
Description
This system includes the chassis, two fan modules, and two AC power supplies.
This system includes the chassis, two fan modules, and two DC power supplies.
NOTE: You can purchase an AC or DC model of the TCX1000-RDM20 that
allows you to use 8 of the 20 universal ports, see
can purchase additional licenses to enable 2, 4, or 12 additional universal
ports. See Table 4 on page
Table 4 on page 5 describes the TCX1000-RDM20 software licenses.
3— Power supplies
5.
Description
License for 2 additional universal ports.
Chapter 1: System Overview
Table 3 on page 5. You
5