Tcx1000-Rdm20 Management Port Leds - Juniper TCX1000-RDM20 Hardware Manual

Related
Documentation

TCX1000-RDM20 Management Port LEDs

Table 9: TCX1000-RDM20 RJ-45 Management Port LEDs
LED
Link (left of receptacle)
Status (right of receptacle)
Related
Documentation
Copyright © 2019, Juniper Networks, Inc.
TCX1000-RDM20 Management Port LEDs on page 15
TCX1000-RDM20 Chassis and Port Status LEDs on page 12
The management port—labeled
management panel.
DCN 0
The management port is an Ethernet port that supports an RJ-45 connector and has
separate LEDs for status and activity.
Figure 7: Management Port LEDs on the TCX1000-RDM20
1 2 3
1— LEDS for ETH CRAFT
2—LEDs for DCN 0
Table 9 on page 15 describes the RJ-45 management port LEDs.
Color
Unlit
Green
Unlit
Yellow
TCX1000-RDM20 Management Panel on page 14
Chapter 2: TCX1000-RDM20 Components and Descriptions
—on the TCX1000-RDM20 is located on the
ETH CRAFT
and are Ethernet ports for local management.
DCN 1
Figure 7 on page 15
3— LEDs for DCN 1
State
Off
On steadily
Off
On steadily
shows the location of the LEDs.
Description
No link is established, there is
a fault, or the link is down.
Link is up.
Link is down.
There is data activity.
15