Before You Begin Mounting The Tcx1000-Rdm20 - Juniper TCX1000-RDM20 Hardware Manual

Before You Begin Mounting the TCX1000-RDM20

Copyright © 2019, Juniper Networks, Inc.
Before you begin mounting a TCX1000-RDM20 in the rack:
Ensure that you understand how to prevent electrostatic discharge (ESD) damage.
1.
See "Prevention of Electrostatic Discharge Damage" on page
Verify that the site meets the requirements described in
2.
Preparation Checklist" on page
Place the rack in its permanent location, allowing adequate clearance for airflow and
3.
maintenance, and secure it to the building structure.
Read "General Safety Guidelines and Warnings" on page
4.
Instructions Warning" on page
Remove the TCX1000-RDM20 from the shipping carton (see
5.
TCX1000-RDM20" on page
Ensure that you have the following parts and tools available to mount the
6.
TCX1000-RDM20 in a rack:
ESD grounding strap (not provided).
Eight self-tapping 10-32 bolts to secure the chassis and mounting brackets to the
rack (provided).
19-in. mounting brackets (attached to the chassis).
(Optional) 21-in. and 23-in. mounting brackets (provided).
Screwdriver appropriate for the rack mounting screws (not provided).
CAUTION: If you are mounting multiple devices in a rack, mount the device
in the lowest position of the rack first. Proceed to mount the rest of the devices
from the bottom to the top of the rack to minimize the risk of the rack toppling.
Chapter 11: Unpacking and Mounting the TCX1000-RDM20
29.
159.
61).
178.
"TCX1000-RDM20 Site
153, and "Installation
"Unpacking the
63