Mounting A Tcx1000-Rdm20 In A Rack Or Cabinet - Juniper TCX1000-RDM20 Hardware Manual

TCX1000 Programmable ROADM Hardware Guide
Table 31: Inventory of Components Supplied with a TCX1000-RDM20
Component
Chassis with two fan modules and two power supplies
installed. The 19-in. (front and rear) brackets are preinstalled.
Self tapping bolts to secure the chassis and mounting brackets
to the rack.
21-in. mounting brackets (front and rear).
23-in. mounting brackets (front and rear).
Fiber management clip and installation hardware.
Grounding lug
Number 10 washers for the ground lug.
Number 10 hex nut for the ground lug.
AC power cord (only with the AC version).
Number 8 ring lug for DC power (only with the DC version).
OSC SFP—100BASE-FX Ethernet, 1511 nm, 43 dB reach.
LC/UPC duplex fiber patchcord—30-cm length, 2-mm jacket.
3-dB LC fixed optical attenuators.
Related
Documentation

Mounting a TCX1000-RDM20 in a Rack or Cabinet

62
Overview of Installing the TCX1000-RDM20 on page 59
Mounting a TCX1000-RDM20 in a Rack or Cabinet on page 62
You can mount a TCX1000-RDM20 in a two-post or four-post rack by using the attached
mounting brackets.
Before You Begin Mounting the TCX1000-RDM20 on page 63
Mounting the TCX1000-RDM20 on page 64
Quantity
1
8
2
2
1
1
2
1
1 for each power supply
1 for each power supply
1
1
2
Copyright © 2019, Juniper Networks, Inc.