Guidelines For Packing Hardware Components For Shipment; Packing A Tcx1000-Rdm20 Chassis Or Component For Shipping - Juniper TCX1000-RDM20 Hardware Manual

TCX1000 Programmable ROADM Hardware Guide

Guidelines for Packing Hardware Components for Shipment

Packing a TCX1000-RDM20 Chassis or Component for Shipping

146
Description of the failure
The support representative validates your request and issues an RMA number for
4.
return of the component.
Pack the component for shipment.
5.
To pack and ship individual components:
When you return components, make sure they are adequately protected with packing
materials and packed so that the pieces are prevented from moving around inside the
carton.
Use the original shipping materials if they are available.
Place individual components in antistatic bags.
Write the RMA number on the exterior of the box to ensure proper tracking.
CAUTION: Do not stack any of the hardware components.
If you are returning a TCX1000-RDM20 or component to Juniper Networks for repair or
replacement, pack the item as described in this topic.
Before you pack a TCX1000-RDM20-RDM20 or component:
Ensure that you have taken the necessary precautions to prevent electrostatic discharge
(ESD) damage. See "Prevention of Electrostatic Discharge Damage" on page
Retrieve the original shipping carton and packing material. Contact your JTAC
representative if you do not have these materials, to learn about approved packing
materials (see "Contacting Customer Support" on page
Ensure that you have the following parts and tools available:
ESD grounding strap.
Antistatic bag, one for each component.
If you are returning the chassis, an appropriate screwdriver for the mounting screws
used on your rack or cabinet.
Packing a TCX1000-RDM20 for Shipping on page 147
Packing TCX1000-RDM20 Components for Shipping on page 147
178.
139).
Copyright © 2019, Juniper Networks, Inc.