Connecting The Tcx1000-Rdm20 To A Management Console - Juniper TCX1000-RDM20 Hardware Manual

TCX1000 Programmable ROADM Hardware Guide
Related
Documentation

Connecting the TCX1000-RDM20 to a Management Console

80
Figure 27: Connecting a TCX1000-RDM20 to a Network for Out-of-Band Management
To DCN 0/DCN 1 port
(on device)
TCX1000-RDM20 Management Panel on page 14
Connecting the TCX1000-RDM20 to a Management Console on page 80
The TCX1000-RDM20 has a console port (labeled
Ensure that you have an RJ-45 to DB-9 rollover cable available.
NOTE: If your laptop or PC does not have a DB-9 male connector pin and you
want to connect your laptop or PC directly to the TCX1000-RDM20, use a
combination of the RJ-45 cable and RJ-45 to DB-9 adapter and a USB to
DB-9 male adapter.
To connect the TCX1000-RDM20 to a management console:
Connect one end of the RJ-45 to DB-9 rollover cable to the console port (labeled
1.
SERIAL ). See Figure 28 on page 81
Connect the other end of the cable directly to a management console or console
2.
server.
Management
network
) with a DB-9 connector.
SERIAL
and Figure 29 on page
Copyright © 2019, Juniper Networks, Inc.
Management PC
Management PC
Management PC
81.