Table of Contents
Advertisement
CHAPTER 11
Unpacking and Mounting the
TCX1000-RDM20
Unpacking the TCX1000-RDM20
Copyright © 2019, Juniper Networks, Inc.
Unpacking the TCX1000-RDM20 on page 61
Mounting a TCX1000-RDM20 in a Rack or Cabinet on page 62
The TCX1000-RDM20 chassis is a rigid sheet-metal structure that houses the hardware
components. The TCX1000-RDM20 is shipped in a cardboard carton, secured with foam
packing material. The carton also contains an accessory kit and quick start instructions.
CAUTION:
The TCX1000-RDM20 chassis is maximally protected inside the
shipping carton. Do not unpack the TCX1000-RDM20 until you are ready to
begin installation.
To unpack a TCX1000-RDM20:
Move the shipping carton to a staging area as close to the installation site as possible,
1.
but where you have enough room to remove the system components.
Position the carton so that the arrows are pointing up.
2.
Open the top flaps on the shipping carton.
3.
Remove the foam holding the TCX1000-RDM20 in place.
4.
Remove the TCX1000-RDM20 from the ESD bag.
5.
Remove the accessory kit and verify the contents against the inventory of components
6.
listed in
Table 31 on page
Save the shipping carton and packing materials in case you need to move or ship the
7.
chassis later.
62.
61
Advertisement
Table of Contents
Troubleshooting
