Table of Contents
Advertisement
Enabling OSC Forwarding on the TCX1000-RDM20
Table 32: OSC Forwarding Conditions
Enable OSC Forwarding If
The TCX1000-RDM20 line port is connected to a TCX1000-ILA.
The TCX1000-RDM20 line port is connected to a TCX1000-RDM20
without DCN access.
Copyright © 2019, Juniper Networks, Inc.
NOTE:
If you want to enable OSC forwarding, you can follow the steps in
the
"Enabling OSC Forwarding on the TCX1000-RDM20" on page 89
then apply the
The session closes and the TCX1000-RDM20 reboots. The TCX1000-RDM20 now
has a static IP address.
Use the proNX Optical Director to provision, monitor, and activate services on a
8.
TCX1000-RDM20 optical network. See the proNX Optical Director Installation Guide
at
https://www.juniper.net/documentation/
Optical Director software on supported servers.
NOTE:
The proNX Optical Director uses the CLI username and password
to log in via NETCONF.
The TCX1000-RDM20 is capable of providing connectivity to a remote site through the
Optical service channel (OSC). OSC forwarding must be enabled when the
TCX1000-RDM20 is connected to a remote site without DCN access or is connected to
a TCX1000-ILA. See the TCX Series Optical Transport System Feature Guide at
www.juniper.net/documentation/en_US/release-independent/tcx/information-products/
pathway-pages/tcx1000-index.html
rules and restrictions, and configuration examples.
After you have completed assigning the IP address, you can enable OSC. OSC forwarding
is disabled by default.
See
Table 32 on page 89
for when you must enable or disable OSC on the
TCX1000-RDM20:
To enable OSC forwarding on the TCX1000-RDM20 from the CLI:
Enter the user ID:superuser.
1.
Enter the password: <password>.
2.
Chapter 15: Performing Initial Configuration
command.
restart warm
for instructions on how to install the proNX
for detailed information on network requirements,
Do not enable OSC Forwarding If
The TCX1000-RDM20 line port is connected to a
TCX1000-RDM20 that is on a different IP subnet.
and
https://
89
Advertisement
Table of Contents
Troubleshooting
