Table of Contents
Advertisement
Mounting and Installing the TCX1000-2D8CMD in a Rack
Before You Begin Installing the TCX1000-2D8CMD
Mounting the Chassis
Copyright © 2019, Juniper Networks, Inc.
You can mount a TCX1000-2D8CMD in a rack by using the TCX1000-RCK-1 kit.
Before You Begin Installing the TCX1000-2D8CMD on page 107
Mounting the Chassis on page 107
Installing the TCX1000-2D8CMD in the Chassis on page 109
Before installing the TCX1000-2D8CMD module, make sure your site meets all power,
environmental, and clearance requirements.
NOTE:
To mount the TCX1000-2D8CMD in a rack, you need the
TCX1000-RCK-1 kit. This kit is separately orderable.
Ensure that you have the following parts and tools available to install the
TCX1000-2D8CMD:
Electrostatic discharge (ESD) grounding strap (not provided).
Screwdriver appropriate for the rack-mounting screws (not provided).
TCX1000-RCK-1 kit (separately orderable), which includes these items:
Chassis to mount the TCX1000-2D8CMD
Four self-tapping bolts to secure the chassis to the rack
Two 19-in. front mounting brackets (preinstalled on the chassis)
Two 21-in. and two 23-in. mounting brackets
Depending on the rack you plan to use, select the appropriate bracket size to fit the frame
on a four-post or two-post frame. See
brackets that are shipped with the chassis.
Chapter 17: Installing and Connecting the TCX1000-2D8CMD Modules
Figure 42 on page 108
for the different types of
107
Advertisement
Table of Contents
Troubleshooting
