Management Cable Specifications And Pinouts; Cable Specifications For Console And Management Connections For The Tcx1000-Rdm20; Console Port Connector Pinouts For The Tcx1000-Rdm20 - Juniper TCX1000-RDM20 Hardware Manual

CHAPTER 9
Management Cable Specifications and
Pinouts
Cable Specifications for Console and Management Connections for the
TCX1000-RDM20
Table 29: Cable Specifications for Console and Management Connections for the TCX1000-RDM20
Port on TCX1000-RDM20
Console ( ) port
SERIAL
Management ( ) port
ETH CRAFT
Related
Documentation

Console Port Connector Pinouts for the TCX1000-RDM20

Copyright © 2019, Juniper Networks, Inc.
Cable Specifications for Console and Management Connections for the
TCX1000-RDM20 on page 55
Console Port Connector Pinouts for the TCX1000-RDM20 on page 55
Table 29 on page 55 lists the specifications for the cables that connect the
TCX1000-RDM20 to a management device.
Cable Specification
RS-232 (EIA-232) serial cable
Category 5 cable or equivalent suitable
for 1000BASE-T operation
Console Port Connector Pinouts for the TCX1000-RDM20 on page 55
The console port (labeled
connector to connect to a console management device. The default baud rate for the
console port is 115200 baud.
Table 30 on page 56 provides the pinout information for the DB-9 console connector.
Maximum Length
7 feet (2.13 meters)
328 feet (100 meters)
SERIAL ) is an RS-232 serial interface that uses an DB-9
Device
Receptacle
DB-9
RJ-45
55