Error Messages - Yamaha A3000 Owner's Manual

Here is a list of the error messages that will appear when an incorrect operation is performed or
when a setting is incorrect.
Audio CD is required. .......................... An audio CD is not loaded into the external CD-ROM drive.
Bulk data error. .................................... Processing of a bulk dump failed.
Bulk protect switch is ON. ................... Bulk data was transmitted to the A3000 when Bulk Protect was turned on.
Cannot copy Volume to FD. ................ Cannot copy a volume unit to a floppy disk.
Cannot find associated file(s). ............. The sound data file referred to by the sound data does not exist.
Cannot find file. ................................... The specified file does not exist.
Cannot find disk. ................................. Not ready for disk operation.
Cannot find SCSI disk. ........................ SCSI disk could not be found.
Cannot revert this sample. .................. A newly created sample or an imported sample cannot be Reverted.
Cannot write to CD-ROM. ................... You attempted to write to CD-ROM.
DIG or OPT signal input is required. ... A digital audio signal is not being input to DIGITAL IN or OPTICAL IN.
Disk drive is not ready. ........................ The disk is not ready for saving or loading.
Disk is not formatted. .......................... The disk is not formatted for the A3000.
Disk is write protected. ........................ The disk is write protected, and writing could not be performed.
Disk read/write error. ........................... An error occurred while reading or writing to/from disk.
File is being accessed. ........................ You attempted to access a file which was undergoing some type of processing.
Foreign disk format. ............................ Since the disk is not in A3000 format, the operation could not be performed.
MIDI buffer is full. ................................ The A3000's processing was not able to keep up with MIDI input.
MIDI is busy. ........................................ You attempted to execute a bulk dump from the front panel while a bulk dump
MIDI receive error. ............................... A MIDI receive error occurred.
Name already exists. ........................... A file or object of the specified name already exists.
Non-existent track or index. ................ The audio CD loaded into the external CD-ROM drive does not have the
Not enough free disk area. .................. The specified operation could not be performed due to insufficient free space
Parameter memory full. ....................... The specified operation could not be performed due to insufficient free space
Please set device number. .................. Transmission or reception of bulk data was attempted with the device number
Sample processing failed. ................... When executing a waveform processing command, the specified command
SIMM configuration error. .................... The A3000 was not able to start up, due to the fact that expansion SIMM's are
Too many takes. .................................. The sample could not be created, either because the maximum number of 64
Unknown disk or file format. ................ Either the contents of the file have been damaged, or it is the wrong format.
Unsupported filename. ........................ The filename could not be detected by the A3000.
Verification error. ................................. A verification error occurred while writing to disk.
Wave memory error. ............................ An error occurred in wave memory.
Wave memory full. .............................. The specified command could not be executed due to insufficient free space in

Error messages

or parameter change etc. was being processed.
specified track number or index number.
on the disk.
in the parameter memory.
turned off.
could not be executed due to insufficient free space in the work area of wave
memory, or for some other reason.
not installed in pairs, or because the usage order of the expansion slots is
incorrect etc.
was exceeded when consecutively recording with New+, or because an
identically-named sample already exists.
wave memory.
Error messages
Appendix
351