Table of Contents
Advertisement
36
ERROR Messages of the ProR3
Initializing the ProR3
If you wish to restore the ProR3 to the factory settings, use the following procedure to initialize
it.
1. Hold down the STORE key and press the POWER switch to turn the power on.
The following message will appear in the display; "Press [ENTER] to initialize ProR3".
2. Press the RECALL/ENTER key to execute initialization.
Pressing any other key will cancel the procedure.
Before you press RECALL/ENTER, check once again that you really want to execute initializa-
tion.
ERROR Messages of the ProR3
"
"
"
"
"
ProR3 Digital Reverberator
Downloaded from:
http://www.usersmanualguide.com/
Warning: When you initialize, all user data will be erased. All settings of user programs,
the program change tables, and system-related settings will return to the factory
default settings.
Program Number Error
*
Data Error
******
******
Store Number Error
**
**
**
MEMORY PROTECTED !
LOW BATTERY
"
"
Selected a program number greater than 90.
*
"
General data error. If necessary, re-initialize the ProR3.
"
Selected a program number greater than 90.
**
"
Memory protection command of the UTILITY function is
ON.
The internal battery is low. Take the unit to a Yamaha ser-
vice center to have the battery replaced.
Advertisement
Table of Contents
