Yamaha A3000 Owner's Manual page 115

ToPgm
Knob 4
• Use the ToPgm (assign-to-program) switch to assign or de-assign the selected sample
to the currently selected program. Set the switch on if you want the program to
produce the sound of the sample, or off if you do not.
• You cannot set the switch for samples that belong to a sample bank (since you must
assign or de-assign the entire bank). If Knob 2 or 3 selects a sample that belongs to a
bank, therefore, the ToPgm setting is blanked out (a "- - -" appears in the setting area).
• Selecting too many overlapped samples (samples with identical or overlapping key
ranges) may cause a delay in playback. In general, you should set your program up
such that no key (on the keyboard) produces sound from more than four monaural
samples (or 2 stereo samples).
Knob 5
• Push this knob to save the selected sample or sample bank. The A3000 then returns a
confirmation screen. Push Knob 5 (>YES) to execute the save, or Knob 4 (>NO) to
cancel.
• If you select a sample bank, the A3000 will also save all samples within the bank.
• Note that this operation always saves to the currently selected disk volume ( 266).
If you wish to save to a different volume, do not use this screen. Use the SAVE com-
mand page instead (press the COMMAND key and go to the >SAVE command page).
( 100).
= off, on
SAMPLE Function
>SAVE
Chapter 4 PLAY Mode
113