Import - Impothr (Import Other Data Type) - Yamaha A3000 Owner's Manual

IMPORT Function

IMPORT - ImpOthr (Import Other Data Type)

Imports SMF, AIFF, or WAV file into an A3000 sequence.
PLAY PROGRAM
EDIT TRIM / LOOP
REC RECORD
DISK PROGRAM
UTILITY TOTAL EQ
Turn action
Push action
Chapter 7 DISK Mode
276
SAMPLE EASY EDIT EFFECT SETUP
MAP / OUT FILTER EG LFO
SETUP METER EFFECT EXT CTRL
SAMPLE SEQUENCE VOLUME DISK
PANEL PLAY SEQUENCE MASTER SYSTEM
Knob 1
Use this page to import a TX16W sample, a computer-generated AIFF or WAV sample
file, or a standard MIDI file (SMF) purchased in a store or generated by a sequencer or
computer.
Important
• The A3000 recognizes the file type by its file extension. The A3000 will not be able to
handle the file if the extension is incorrect.
File extensions are as follows.
.W xx
.AIF
.WAV
• To import a file generated at a computer, begin by saving the file from the computer
onto an MS-DOS–format floppy disk. You can then insert the disk into the A3000.
Use either of the following MS-DOS format types.
If 2DD disk:
If 2HD disk: 18-sector format (1.44MB)
• The A3000 supports SMF File Type 0.
FYI
Changes in pitch, loop playback, or sound quality may occur with some samples. Note
also that the A3000 may be unable to recognize certain AIFF and WAV files.
CONTROL
MIDI / CTRL
Turn Knob 1 to select ImpOthr.
MONITOR
IMPORT
MIDI
Knob 2 Knob 3
- -
TX16W sample file (xx: arbitrary)
AIFF sample file
WAV-type sample file
7-sector format (720 KB)
Knob 4 Knob 5
- -
-