Ext Ctrl Function; Ext Ctrl - Cd-Rom - Yamaha A3000 Owner's Manual

EXT CTRL Function

You use this function to control playback of an audio CD from an external CD-ROM
drive (SCSI drive). This feature lets you record samples from CD playback.
Important
To record CD playback, you must first connect the Analog Out (or Audio Out) connector
from the CD-ROM drive to the analog input(s) on the A3000's front panel. You must also
select use of analog input by setting the Input parameter (on the RecData page;
to AD L/R or AD L.

EXT CTRL - CD-ROM

Selects the CD-ROM drive (by its SCSI ID).
PLAY PROGRAM SAMPLE EASY EDIT
EDIT TRIM / LOOP MAP / OUT FILTER
REC RECORD SETUP METER
DISK PROGRAM SAMPLE SEQUENCE
UTILITY TOTAL EQ PANEL PLAY SEQUENCE
Turn action
Push action
Use this page to designate the CD-ROM drive that you want to control. You designate
the drive by selecting its SCSI ID.
Knob 1 Change Page
• Turn the knob to switch between the function's CD-ROM and CD-DA pages.
• Push the knob to move to the Program/Sample Selection screen. ( 95)
SCSI ID
Knob 2
Turn the knob to select the SCSI ID of the CD-ROM drive that you want to record from.
The right side of the screen indicates the name (and manufacturer) of the device con-
nected to the currently selected SCSI ID. Turn the knob until you see the name (manu-
facturer) of the CD-ROM drive that you want to use.
EFFECT SETUP CONTROL
EG LFO MIDI / CTRL
EFFECT EXT CTRL MONITOR
VOLUME DISK IMPORT
MASTER SYSTEM MIDI
Knob 1 Knob 2
-
= 0,...,7
EXT CTRL Function
Turn Knob 1 to select CD-ROM.
Knob 3 Knob 4
- -
- -
Select P/S
Chapter 6
227)
Knob 5
-
-
RECORDING Mode
241