Saving Your Data - Yamaha A3000 Owner's Manual

Press the COMMAND key.
2.
Insert the floppy disk you want to format into the disk drive.
3.
In this example, it is assumed that you are using a new (unformatted) HD-type disk.
Turn Knob 1 to select the FD_FMT screen.
4.
Make sure that Type is set to 2HD. (If 2HD is not already selected, turn Knob
5.
2 to select it.)
The name to be given to the formatted disk appears above Knobs 4 and 5. The default
name is "New FD". Although you are free to change the name, we will leave the default
name unchanged for this example.
6. Press Knob 1 (>FD_FMT).
Press Knob 5 (>YES).
7.

Saving Your Data

The next procedure shows how to save all of your new data to floppy disk.
Important
This procedure writes all current memory content into the floppy disk, overwriting any
data already existing on the disk.
The following confirmation prompt appears.
The A3000 starts to format the disk. Please wait until the original screen returns,
indicating that the format is finished.
Saving and Reloading Your Data
Chapter 2 Trying It Out
65