Monitor - Click - Yamaha A3000 Owner's Manual

MONITOR - Click

Creates a "click" sample.
PLAY PROGRAM SAMPLE EASY EDIT
EDIT TRIM / LOOP MAP / OUT FILTER
REC RECORD SETUP METER
DISK PROGRAM SAMPLE SEQUENCE
UTILITY TOTAL EQ PANEL PLAY SEQUENCE
Turn action
Push action
• Use this page to set up a metronome sound that you can use to help time the record-
• When you set Click to on (Knob 5), the A3000 generates a special sample (named
• You can select the output destination for the click by editing the "Click" sample.
Knob 1 Change Page
• Turn the knob to switch between the function's Monitor and Click pages.
• Push the knob to move to the Program/Sample Selection screen. ( 95)
Tempo
Knob 2
Sets the tempo for the click.
Level
Knob 3
Sets the output level for the click.
Beat
Knob 4
Sets the number of beats.
Click
Knob 5
• Set this on if you want to output the click sound. If the setting is on, the A3000
• If the setting is on, the A3000 will include click information into the samples that
EFFECT SETUP CONTROL
EG LFO MIDI / CTRL
EFFECT EXT CTRL MONITOR
VOLUME DISK IMPORT
MASTER SYSTEM MIDI
Knob 1 Knob 2
-
ing of drum and percussion phrases.
"Click") in main memory. (The A3000 will not create the sample, however, if a sample
with this name already exists.) It then uses the sample to produce the metronome
sound while you are working in RECORDING mode.
= 80:00,...,159.99
= 0,...,127
= 1,...,15
= off, on
continues to generate the click while you are working in RECORDING mode.
you record. The information is set into the sample's parameter data, and does not
affect the waveform itself. You can later use the click data as an aid when editing the
sample's waveform addresses. ( 164, 166)
MONITOR Function
Turn Knob 1 to select Click.
Knob 3 Knob 4
- -
Select P/S
Chapter 6
Knob 5
-
RECORDING Mode
245