Other Problems - Yamaha A3000 Owner's Manual

Troubleshooting

Other problems

Appendix
350
Cannot use the A/D input function
• Is the program's A/D In setting turned ON? ( 132)
• Is the A/D input MainOut or AsgnOut set to other than OFF? ( 134)
• Is the A/D input Level or AsLevel set to 0? ( 132)
Cannot make fine adjustments to the sample addresses
• Are Zero (auto zero) or Snap (auto snap) turned ON? ( 161)
Cannot play chords
• Is the sample parameter or easy edit parameter Poly/Mono set to Mono? ( 119, 174)
• Does the sample parameter or easy edit parameter Alternate Group have a setting
other than OFF? ( 119, 208)
Volume or tone differs depending on the pitch
• Is level scaling specified for the sample? ( 180)
• Is filter scaling specified for the sample? ( 185)
Tone, pitch or volume changes cyclically
• Is the sample's LFO parameter FltrMod set to a Depth or 1 or more? ( 205)
• Is the sample's LFO parameter PtchMod set to a Depth or 1 or more? ( 206)
• Is the sample's LFO parameter AmpMod set to a Depth or 1 or more? ( 207)
• If an external controller has been set to control the Ptch Mod Depth, Amp Mod Depth
or Cutoff Mod Depth of a sample, is that controller raised (or lowered) ? ( 210)
Of the incoming MIDI messages, only specific MIDI messages are not received
• In the utility setting MIDI Receive Filter, are any of the settings CtrlChg, AftrTch or
PtchBnd set to "disable"? ( 309)