Yamaha A3000 Owner's Manual page 127

If "EffectEditType" is set to "favorite", the page looks like this.
Sets parameters for the selected effect (Effect 1, 2, or 3).
PLAY PROGRAM SAMPLE EASY EDIT
EDIT TRIM / LOOP MAP / OUT FILTER
REC RECORD SETUP METER
DISK PROGRAM SAMPLE SEQUENCE
UTILITY TOTAL EQ PANEL PLAY SEQUENCE
Turn action
Push action
Use this page to set parameter values for the selected effect (Effect 1, 2, or 3). The screen
displays the four "favorite" parameters for this effect. You can set the values with Knobs
2 to 5, or change the "favorite" selection by pressing any of the Knobs 2 to 5.
Knob 1 Change Page
• Turn the knob to change to a different page within the EFFECT function. Available
• Push the knob to move to the Program/Sample Selection screen. ( 95)
Value
Knobs 2 to 5
Each knob sets the value for one parameter. The parameter name appears on the top
line of the screen, and the current value on the second line. Turn the knob to change the
value.
Although each effect offers a large number of parameters, this screen only shows four
"favorites." As the factory default, the screen shows the four most important (most in-
fluential) parameters.
You can change the "favorite" grouping by pressing any knob between 2 and 5, produc-
ing a screen such as shown above. You can then turn Knobs 2 through 5 to select new
favorites. When you are ready to return to the value-setting screen, press one of the
knobs (Knobs 2 to 5) again.
EFFECT SETUP CONTROL
EG LFO MIDI / CTRL
EFFECT EXT CTRL MONITOR
VOLUME DISK IMPORT
MASTER SYSTEM MIDI
Knob 1 Knob 2
pages are: EfType, Efct1, Efct2, Efct3, In&Out, and EdType.
= parameter name
EFFECT Function
Turn Knob 1 to select Efct1, Efct2, or Efct3.
Knob 3 Knob 4
Select P/S
Select Parameter
Chapter 4
Knob 5
PLAY Mode
125