Software For The Deqse; Memory Configuration; Memory Area; Edit Area Vns Eicere - Yamaha DEQ5E Operation Manual

SOFTWARE FOR THE DEQ5E
* For convenience, the software functions explained in this document(such as Mode, Menu, and Parameter) use the
same nomenclature as DEQS.
1. Memory configuration
(1) Memory area
The DEQSE has an area where the equalizer setting data (program) is preserved so that it can be recalled anytime.
This is called the "Memory area".
The DEQSE has GEQ and PEQ equalizer modes. In the memory area, a maximum of 40 programs can be
preserved, no matter which mode they are created in.
When shipped from the factory, initial program data (initial data with flat characteristics) in the two modes are
preserved in the memory area, 20 in the first part and another 20 in the second part. (Each 20 have the same
contents.)
| Two equalizer modes when shipping from the factory
€ 30-band graphic equalizer (GEQ) mode ...... Memory number: 1-20
€ 6-band parametric equalizer (PEQ) mode ... Memory number: 21-40
(2) Edit area
The area where DEQSE program is actually executed or data is modified after recalling the data from the memory
area is called "Edit area".
A program using a suitable equalizer mode is recalled from the memory area to the edit area. It can be used as it
is, or data can be modified before use.
The new program (after modifying the data in the edit area) is stored in any memory number in the memory area.
Re-write Memory as often as you like.
(3) Initial data area
If all programs are made with only one equalizer mode, you can copy initial data of another equalizer mode from
"Initial data area" to the edit area with the PARAMETER COPY" menu in UTILITY.
«DEQSE memory configuration»
Initial data area Memory area
ROS PEQ INITIAL
GEQ INITIAL
DATA
|
o Ee
MEMORY No. 40
DATA
Бу ыны MEMORY No. 3
MEMORY . | p desees MEMORY No. 2
No. 1 /
Copy Recall Store
Edit area