Included Monitor Stand; Monitor Arm - Yamaha Nuage Setup Manual

【Included monitor stand】

The advantages of using monitor arms are that they let you position the monitor with more freedom,
in terms of vertical and horizontal position and in terms of angle, and they don't require as much
depth on your desk surface as a monitor stand. The disadvantages are that the monitor arm may be
less stable, depending on how many monitors it is supporting, how much they weigh, and how far
out they are cantilevered. If you can position the monitor at a suitable height and angle using the
included stand, as shown above, we recommend using that; if not, we recommend using a monitor
arm that supports a single monitor, and positioning it near the centerline of the clamp, to the extent
this is possible.
We recommend that the video monitor be angled at 70°, in line with the rear surface of the
controller.
Tip:
Adjust all monitors to be at the same height with the correct angle takes a bit of skill and
experience. In case of using HP monitors, lock it at its lowest height and find the best angle from
there.
When using HP Monitor ZR2440w, it is recommended to use Monitor Arm compliant to
VESA100mm. Please find the following list for recommendation

【Monitor Arm】

13