Manage Do List - Siemens SINUMERIK 840D sl Operating Manual

Create MyConfig - Topo
6.4 Topo - operation
DO list in the DOList Editor
Display of the DO list in the DOList Editor:
Figure 6-6 Display of the DO list in the DOList Editor
6.4.4

Manage DO list

Call the DO list via the "Data" > "Manage DO list..." main menu. Manage the DO variables
used in the topology project via the DO list.
DO variables can either be created manually or imported from an existing UVDX or UVD file
and then edited. The DO list serves as interface between the Expert and Topo configuring
tools.
DO variables can be exported
this. You can also link a DO list
We recommend linking the same DO list in Topo and Expert.
470
from Topo to a DO list "*.uvdx" or "*.uvd", or imported
.
SINUMERIK Integrate Create MyConfig - Diff, Expert, Topo
Operating Manual, 12/2017, A5E36537479B-AE
from