Create MyConfig - Expert
4.4 Project folder
You can find detailed information on the dialog scripts in the section with the same name
"Dialog scripts (Page 145)".
4.4.2.38
NCU/PPU result state (package execution)
This dialog allows a data backup of the result state of the NCU/PPU after the package
execution.
All current control data, including the CF card, or only the currently active online data of the
NC, PLC and DRV subsystems can be saved as SINUMERIK archive.
Dialog view during package execution (for commissioning engineers / operators)
A data backup of the CF card including all current control data (NC, PLC, DRV) can be selected
on this dialog page.
After package execution, the data backup is stored with the name '<CF-Karten-ID>_result.tgz'
in the folder with the CF card ID name that is located next to the package.
Further information can be found on package execution in the Package execution (Page 405)
section.
Figure 4-46
222
NCU/PPU result state - commissioning engineer / operator view
SINUMERIK Integrate Create MyConfig - Diff, Expert, Topo
Operating Manual, 12/2017, A5E36537479B-AE