Siemens SINUMERIK 840D sl Operating Manual page 272

Create MyConfig - Expert
4.5 Component editor
The mode for the Change action is selected via the drop-down list below the tree view at
Settings.
Example 2
A Linux shell script is created on the CF card, which, with the aid of the SED Editor, deletes
all tool data from the INITIAL.INI if the variable is Up.Cfg >= 2.
Figure 4-74 Example 2 - deleting tool data from the INITIAL.INI
In the configuration file for the SED Editor, additional script-controlled instructions could be
inserted depending on Up variables or Config variables.
Figure 4-75 Example 2 - inserting script-controlled instructions
Script Editor
Based on the structure of the configuration files, change instructions should be specified
specifying the section. They comprise an identifier, operator and possibly the value. Enter
these line-by-line. The context menu supports insertion of operators.
Lines that start with a semicolon ";" are not evaluated and can be used for comments.
272
SINUMERIK Integrate Create MyConfig - Diff, Expert, Topo
Operating Manual, 12/2017, A5E36537479B-AE