Siemens SINUMERIK 840D sl Operating Manual page 17

#
\Automation\SINUMERIK\Create MyConfig 4.8"
#DestinationPath="\Program Files\Siemens\Automation\SINUMERIK
\Create MyConfig 4.8"
#
#
#
#Features=Diff,Expert,Topo,Samples
#
#
#
#
#
#
#
#
#
#
#
#
#
#
-------------------------------------------------------------------
#
#
#
path\>OPFILE.txt\"\"\""
#
#
#
#
Note
In the CD installation directory \Setup\CMC\setup\x64 or \Setup\CMC\setup\X86, in
addition to the setup file, there is also the commented template "OPFILE.txt", which you can
appropriately adapt and use.
Example of control file "OPFILE.txt" for installation with default settings
SINUMERIK Integrate Create MyConfig - Diff, Expert, Topo
Operating Manual, 12/2017, A5E36537479B-AE
default (Windows 32 Bit): "\Program Files (x86)\Siemens
--- Features ---
Selection of the components to be installed
Selection of components to be installed
--- Settings ---
Clear settings of a previous installation /
Delete settings from previous installation
(default: DeleteSettings=0)
DeleteSettings=1
Den NcuShareService installieren
Installing the NcuShareService
(default: NcuShareService=1)
NcuShareService=1
Selecting the path for the exchange folder NCuShareService
Selection of the share folder of the NcuShareService
NcuShareServiceShareFolder=C:\Users\Public\UpNcuShare
Command line call for the automated installation: /
Call of command line for automatic installation:
setup.exe /W /L<Language ID> /V"commandline=\"\"\"-OF:<absolute
Example of a call for installation, German:
setup.exe /W /L1031 /V"commandline=\"\"\"-OF:OPFILE.txt\"\"\""
Command line example for installation of English
setup.exe /W /L1033 /V"commandline=\"\"\"-OF:OPFILE.txt\"\"\""
Installation
2.2 Installation via command line
17