Overview Of User Interface; Topo - Overview Window - Siemens SINUMERIK 840D sl Operating Manual

Assignment of DO variables and DO properties
You can assign DO variables to the modules in Topo. These DO variables provide properties
that can be used for configuring the package execution in Expert. In this way, it is possible to
work flexibly in Expert with defined DO variables whose absolute values only apply during the
package runtime on the machine.
SINAMICS modules that do not generate their own DO can be assigned the DO-generating
modules via DO variables, e.g. Sensor Module to Motor Module.
The drive-specific parameters can therefore be stored modularly in a package without
reference to a particular DO number, module number, or slave.
The assignment of the parameters to the topology-specific DOs on the machine is controlled
flexibly via the DO variables, manipulation tasks and step scripts defined in the configuration
of the package.
The DRIVE-CLiQ wiring created in Topo and the assignments made for DO variables, DO
names and DO numbers are saved via a deploy function to a "*.ust" comparison topology or
"*.utz" user-specified topology file which is accessed when a package is executed.
6.3

Overview of user interface

6.3.1

Topo - overview window

The Topo software interface provides the following operating areas:
A component with the name "{0}" already exists for the preconfigured components of DO "{1}".
SINUMERIK Integrate Create MyConfig - Diff, Expert, Topo
Operating Manual, 12/2017, A5E36537479B-AE
Create MyConfig - Topo
6.3 Overview of user interface
451