Siemens SINUMERIK 840D sl Operating Manual page 100

Create MyConfig - Diff
3.5 File comparison
①
②
③
Comparison tab
You can define how the file comparison handles upper/lower-case letters and spaces in the
"Compare" tab. The background color for comparisons can additionally be defined.
100
The existing comparison configurations are listed in this area of the configuration dialog and can
be selected by clicking them. Configurations shown in gray are user-specified configurations;
these can be changed, but not deleted - and can be restored again at any time.
Configurations can be managed using these buttons.
Using "Add," a new configuration is generated, which can also be adapted.
A copy of the selected comparison configuration is created by clicking "Duplicate".
"Restore user-specified setting" undoes the changes to the specified comparison configuration.
NOTE::
The "Restore user-specified setting" button is only active if a user-specified configuration has
been selected the contents of which are no longer the same as the default setting. In addition
to restoring the default setting, this button can also be used to check whether the contents are
identical with those of the default setting.
The properties that belong to the selected configuration are stored in this area of the Configu‐
ration dialog; these properties include comparison criteria, filter criteria, alignment of the lines
and a comment.
SINUMERIK Integrate Create MyConfig - Diff, Expert, Topo
Operating Manual, 12/2017, A5E36537479B-AE