Create MyConfig - Expert
4.12 Package execution
Information about the logbook
The type of message is documented in the logbook; here, information, the message text and
the message that the user acknowledged with OK.
Figure 4-147
Example of a dialog page: CNC software
4.12.4.6
Example of a dialog page: Step tree
This dialog page is optional; this means that a display is only made in the logbook if it was
configured in Expert.
See also: Dependency of the dialog pages on data areas (Page 144)
418
SINUMERIK Integrate Create MyConfig - Diff, Expert, Topo
Operating Manual, 12/2017, A5E36537479B-AE