Siemens SINUMERIK 840D sl Operating Manual page 130

Create MyConfig - Expert
4.2 Introduction
Project
Close all
Exit
Table 4-2 Edit main menu
Edit
Cut
Copy
Paste
Delete
Refresh
Table 4-3 View main menu
View
Source explorer
Cross references
Verification run
Go to error/warn‐
ing forward
Go to error/warn‐
ing backward
Toolbars
Table 4-4 Components main menu
Component
New...
Open...
Save
Save as...
130
Closes the project and all of the components that have been opened.
<Alt+F4> Terminates the Expert program
<Ctrl+X> Removes the currently selected objects and copies them to the clipboard.
<Ctrl+C> Copies the currently selected objects to the clipboard.
<Ctrl+V> Pastes the objects from the clipboard to the selected position.
<Del> Deletes the currently selected objects.
<F5> Refreshes the complete step tree.
This function is particularly useful for the refreshing of linked steps.
Hides or displays the source explorer at the upper edge of the working area.
Shows all identifiers, folders, and file objects used in the project on the "Identifiers"
and "Folders and File objects" tabs.
Hides or displays the verification run at the lower edge of the application window.
<F8> After a verification run, a jump can be made to the next or previous error or warning
entry.
<Shift+F8>
Standard Allows toolbars to be hidden or displayed.
Quick search
<Alt+Shift Creates a new component. Internal and external components can be created.
+N>
<Alt+Shift Opens an existing component.
+O>
<Alt+Shift Saves the current component.
+S>
Saves the current component with another name - either internally or externally.
SINUMERIK Integrate Create MyConfig - Diff, Expert, Topo
Operating Manual, 12/2017, A5E36537479B-AE