Siemens SINUMERIK 840D sl Operating Manual page 273

Special operators (Page 289) can be inserted anywhere in a line to insert the contents of UP
variables for modification.
Note
If folders, files, sections or identifiers are not available, then the package itself generates these
to implement a value assignment.
Operators
=
~
?=
Example:
Additional useful notes
Operate
SINUMERIK Integrate Create MyConfig - Diff, Expert, Topo
Operating Manual, 12/2017, A5E36537479B-AE
Assignment of a new value
Deleting data, i.e. identifier and value are removed
Assigning a (new) value if no (old) value is available
[LANGUAGE]
FontList=Europe, Europe, Europe, Europe, Europe
[Local]
ADRESS0=0,NAME=/NC,LINE=11
ADRESS1~
[Function]
Del. Dir query1?=111
For the "Operate" target area, create the "All", "NCU" or "PCU" folders using
known folders.
These folders define for which SINUMERIK Operate the tasks are to be
processed.
Below this folder, you define the path to the files to be modified.
The tasks stored at "All" are processed on the NCU/PPU and on the PCU.
The tasks stored in the other two folders are only processed on the associ‐
ated system.
Changes of the SINUMERIK Operate display data are possible via the
"Change" and "Manipulate" actions in CMC. It makes sense to use only one
of the two methods (preferably "Manipulate"), because they affect one an‐
other.
Create MyConfig - Expert
4.5 Component editor
273