Patch; Configuring User Interface Languages For Packages; User Interface Texts And User Interface Languages For Packages - Siemens SINUMERIK 840D sl Operating Manual
Integrate create myconfig - diff, expert, topo
Hide thumbs
Also See for SINUMERIK 840D sl:
- Function manual (2184 pages) ,
- Programming manual (1334 pages) ,
- Commissioning manual (1102 pages)
Table of Contents
Advertisement
Create MyConfig - Expert
4.7 Configuring user interface languages for packages
Machine data / time of the function call
The following table shows which data is permitted and the point in time up to which it must be
written to ensure that the machine data still takes effect.
Machine data (MD)
$MN_SINAMICS_MAX_SLAVE_ADDRESS[0-3]
Example
For the 840D sl, to exclude all CU320-2 DPs beginning at slave address 8 on the
PROFIBUS DP1 (X126) from the automatic device configuration, display and archiving, the
function is used as follows:
Prepare("$MN_SINAMICS_MAX_SLAVE_ADDRESS[0]",7)
Thus, Control units (CU) that have been put into operation are excluded from the device
configuration to be performed by the package.
4.6.19.2
Patch
Patch("<path>")
The Patch() procedure calls an internal component.
The procedure can generally be called in all dialog scripts, step scripts, action scripts and
manipulation tasks.
The user is responsible for the content of the component, i.e. whether it can be executed at
the call location.
The path of the component saved for <path> must be specified in the form "<project
name>/<component name>" or only "<component name>".
The project and component names must always be specified without a file extension (*upz,
*.upc).
4.7
Configuring user interface languages for packages
4.7.1
User interface texts and user interface languages for packages
Introduction
A CMC package displays two types of user interface texts during the processing through CMC-
Shield, these are system texts and user texts.
The system texts are the texts that are permanently stored in the system. Texts with a gray
background are generally system texts, e.g. the title of the dialog page, the labeling of the
346
Latest point in time for a function call
OnInit "System configuration" dialog page
SINUMERIK Integrate Create MyConfig - Diff, Expert, Topo
Operating Manual, 12/2017, A5E36537479B-AE
Advertisement
Table of Contents
