Siemens SINUMERIK 840D sl Operating Manual page 163

Display associated system variables button
Clicking the
- system variables"dialog. All system variables used for "Select offline archive" are listed in
this dialog.
Information on the system variables·can be found in the System variables for the Select offline
archive dialog (Page 374) section.
Further general information on the system variables can be found in the Reference list system
variables (Page 368) section.
Dialog
More detailed information about the "Dialog" property group can be found at Package
configuration (configuring) (Page 153).
Offline archives
The following property is available:
List
Input archive
The following property is available:
Preselection
NC part archive (input)
The following property is available:
Preselection
PLC part archive (input)
The following property is available:
Preselection
SINUMERIK Integrate Create MyConfig - Diff, Expert, Topo
Operating Manual, 12/2017, A5E36537479B-AE
button (Display associated system variables) opens the "Select offline archive
Clicking the
This is where you find the list of the offline archives to also be
specified in the package that can be used in the subsequent
preselections and in package execution.
An archive can be selected from which all of the areas con‐
tained for package execution are available.
If a "subarchive (input)" is preselected, its associated area is
used as replacing area.
An archive can be preselected from which only the NC area for
package execution is used.
An area originating from the "input archive" is thus replaced.
An archive can be preselected from which only the PLC area
for package execution is used.
An area originating from the "input archive" is thus replaced.
Create MyConfig - Expert
button opens the "List of archives" dialog.
4.4 Project folder
163