Main Menus And Toolbars - Siemens SINUMERIK 840D sl Operating Manual

4.2.3

Main menus and toolbars

Table 4-1 Project main menu
Project
New...
Open...
Save
Save All
Save as...
Password protection
Display cross
references
Verification run
Deployment
Import package...
Properties...
CMC report...
Last opened
SINUMERIK Integrate Create MyConfig - Diff, Expert, Topo
Operating Manual, 12/2017, A5E36537479B-AE
<Ctrl+N> Creates a new project with the specified name and storage path.
<Ctrl+O> Opens an existing project. Also permits an existing project to be selected for con‐
version.
<Ctrl+S> Saves the selected project and all internal or externally linked components belong‐
ing to this project, if there is a save request for these.
<Ctrl+Shift Saves all projects and components for which there is a save request.
+S>
Saves all opened projects and components with a different name or location.
The project, the components, the package, and the logbook can be protected from
unauthorized access with passwords.
Enter the password...
Edit password list...
Transfer password list
<Ctrl+R> Displays the cross references for the project and all of its components.
<Ctrl+B> Checks the project including all components. The verification run is started auto‐
matically before each deployment.
Checks the project and deploys it as package.
Deploy Linux
package (NCU/
PPU)...
Deploy Windows
package (PC/
PCU)...
Deploy Win‐
dows package
and execute...
Deploy pack‐
age without the
executable part...
Imports all data into a new project from a deployed package such as USZ, EXE,
UAZ.
Shows important project properties, such as path of the project, date of change,
changed by, version and comment.
The "CMC report" shows information about the project and all components. The
"CMC report" can be exported and stored as Excel, PDF or Word file.
Provides a fast entry to open the last projects used.
Log on to the open project using a different
password (extended rights).
Define the passwords with the corresponding
rights on the package and project.
Transfer the password list to:
● components of the project...
● components of a storage folder...
<Ctrl+D> Can be executed on the NCU/PPU (USZ)
<Ctrl+Shift Can be executed on a PC or the PCU (EXE)
+D>
- -
<Alt+Shift+D> Cannot be executed (UAZ)
Create MyConfig - Expert
4.2 Introduction
129