Setting Data; Channelspecific Setting Data - Siemens SINUMERIK 840D Function Manual

Number Identifier: $MA_
35122 GEAR_STEP_MIN_VELO2[n]
35130 GEAR_STEP_MAX_VELO_LIMIT[n]
35135 GEAR_STEP_PC_MAX_VELO_LIMIT[n]
35140 GEAR_STEP_MIN_VELO_LIMIT[n]
35150 SPIND_DES_VELO_TOL
35160 SPIND_EXTERN_VELO_LIMIT
35200 GEAR_STEP_SPEEDCTRL_ACCEL[n]
35210 GEAR_STEP_POSCTRL_ACCEL[n]
35212 GEAR_STEP_POSCTRL_ACCEL2[n]
35220 ACCEL_REDUCTION_SPEED_POINT
35230 ACCEL_REDUCTION_FACTOR
35300 SPIND_POSCTRL_VELO
35350 SPIND_POSITIONING_DIR
35400 SPIND_OSCILL_DES_VELO
35410 SPIND_OSCILL_ACCEL
35430 SPIND_OSCILL_START_DIR
35440 SPIND_OSCILL_TIME_CW
35450 SPIND_OSCILL_TIME_CCW
35500 SPIND_ON_SPEED_AT_IPO_START
35510 SPIND_STOPPED_AT_IPO_START
35550 DRILL_VELO_LIMIT[n]
35590 PARAMSET_CHANGE_ENABLE
36060 STANDSTILL_VELO_TOL
36200 AX_VELO_LIMIT
18.12.2

Setting data

18.12.2.1

Channelspecific setting data

Number Identifier: $SC_
42600 JOG_FEED_PER_REF_SOURCE
42800 SPIND_ASSIGN_TAB
42900 MIRROR_TOOL_LENGTH
42910 MIRROR_TOOL_WEAR
42920 WEAR_SIGN_CUTPOS
Axes and spindles
Function Manual, 06/2019, A5E47437747B AA
Description
2nd gear stage data set: Minimum speed for automatic
gear stage change
Maximum speed of gear stage
Maximum speed of gear stage in position control
Minimum speed of gear stage
Spindle speed tolerance
Spindle speed limitation from PLC
Acceleration in speed control mode
Acceleration in position control mode
2nd gear stage data set: Acceleration in position control
mode
Speed limit for reduced acceleration
Reduced acceleration
Position control activation speed
Positioning direction of rotation for a non-synchronized
spindle
Oscillation speed
Oscillation acceleration
Oscillation start direction
Oscillation time for M3 direction
Oscillation time for M4 direction
Feed enable with spindle in setpoint range
Feed enable with stationary spindle
Maximum speeds for tapping
Parameter set specification possible from PLC
Threshold velocity "Axis/spindle stationary"
Threshold value for velocity monitoring.
Description
Revolutional feedrate control in JOG mode
Spindle number converter
Mirror tool length offset
Mirror wear values of tool length compensation
Mirror wear values of machining plane
S1: Spindles
18.12 Data lists
845