Response To Certain Nc/Plc Interface Signals (Cpmvdi) - Siemens SINUMERIK 840D Function Manual

M3: Coupled axes
14.5 Generic coupling
Example 2:
Programming
CPDEF=(S2) CPLA[S2]=(S1)
CPON=(S2) CPMBRAKE[S2]=1
...
14.5.5.18

Response to certain NC/PLC interface signals (CPMVDI)

The CP keyword CPMVDI can be used to define the coupling module's response to certain NC/
PLC interface signals.
Programming
Syntax:
Designation:
Functionality:
536
;
;
CPMVDI[FAx]= <value>
Coupling Mode VDI Signal
CPMVDI is a bit-coded CP keyword, which defines the response of the
coupling module of following axis FAx to certain NC/PLC interface signals.
The bit combination operators B_OR, B_AND, B_NOT, and B_XOR can be
used to set individual bits.
Comment
Definition of a spindle coupling:
Leading spindle S1 with following spindle S2
Activation of the coupling with following
spindle S2. NST "feed stop / spindle stop"
or "CP SW limit stop" should brake the cou-
pling group.
Function Manual, 06/2019, A5E47437747B AA
Axes and spindles