Behavior Of The Following Axis At Switch-Off (Cpfmof); Position Of The Following Axis When Switching Off (Cpfpos+Cpof) - Siemens SINUMERIK 840D Function Manual

Example:
Programming
CPFMON[X2]="CONT"
14.5.5.9

Behavior of the following axis at switch-off (CPFMOF)

The behavior of the following axis/spindle during complete switch-off of an active coupling can
be programmed with the keyword CPFMOF.
Programming
Syntax:
Identifiers:
Functionality:
Switch-off response:
Example:
Programming
CPFMOF[S2]="CONT"
14.5.5.10

Position of the following axis when switching off (CPFPOS+CPOF)

When switching off a coupling (CPOF) traversing to a certain position can be requested for the
following axis.
Axes and spindles
Function Manual, 06/2019, A5E47437747B AA
Comment
; The current motion of following axis X2 is taken over as
start motion.
CPFMOF[FAx]= "<switch-off behavior>"
Coupling Following Mode Off
Defines the behavior of the following axis/spindle during complete
switch-off of the coupling.
Type: STRING
Range of values:
"STOP" Stop
"CONT" Continue
Default value: "STOP"
Comment
; The following spindle S2 continues to traverse at the speed
that was applied at the instant of deactivation.
M3: Coupled axes
14.5 Generic coupling
Stop of a following axis/spindle.
An active overlaid motion is also
braked to standstill. Then the coupling
is opened, (deactivated).
For spindles and main traverse axes
only!
The following spindle continues to tra‐
verse at the speed/velocity that ap‐
plied at the instant of deactivation.
519