Phase 2: Synchronization With The Zero Mark - Siemens SINUMERIK 840D Function Manual

R1: Referencing
10.5 Referencing with incremental measurement systems
Phase 1: Properties
● Feedrate override is active.
● Feed stop (channel-specific and axis-specific) is active.
● NC stop and NC start are active.
● The machine axis is stopped if the reference cam is not reached within the parameterized
maximum distance:
MD34030 $MA_REFP_MAX_CAM_DIST (max. distance to the reference cam)
See also
Channelspecific referencing (Page 294)
10.5.5

Phase 2: Synchronization with the zero mark

Phase 2: Graphic representation
Figure 10-5 Phase 2: Synchronization with the zero mark
Phase 2: Start
Phase 2 is automatically started when Phase 1 has been completed without an alarm.
302
Axes and spindles
Function Manual, 06/2019, A5E47437747B AA