Siemens SINUMERIK 840D Function Manual page 338

R1: Referencing
10.12 Data lists
Number Identifier: $MA_
34080 REFP_MOVE_DIST
34090 REFP_MOVE_DIST_CORR
34092 REFP_CAM_SHIFT
34093 REFP_CAM_MARKER_DIST
34100 REFP_SET_POS
34102 REFP_SYNC_ENCS
34104 REFP_PERMITTED_IN_FOLLOWUP
34110 REFP_CYCLE_NR
34120 REFP_BERO_LOW_ACTIVE
34200 ENC_REFP_MODE
34210 ENC_REFP_STATE
34220 ENC_ABS_TURNS_MODULO
34230 ENC_SERIAL_NUMBER
34232 EVERY_ENC_SERIAL_NUMBER
34300 ENC_REFP_MARKER_DIST
34310 ENC_MARKER_INC
34320 ENC_INVERS
34330 REFP_STOP_AT_ABS_MARKER
35150 SPIND_DES_VELO_TOL
36302 ENC_FREQ_LIMIT_LOW
36310 ENC_ZERO_MONITORING
338
Description
Reference point distance / destination point for dis‐
tance-coded system
Reference point offset / absolute offset, distance-coded
Electronic reference cam shift for incremental measur‐
ing systems with equidistant zero marks
Reference cam / reference mark distance
Reference point value
Actual value adjustment to the referencing measure‐
ment system
Enable referencing in follow-up mode
Axis sequence for channel-specific referencing
Polarity change of the BERO cam
Referencing mode
Status of absolute encoder
Absolute encoder range for rotary encoders
Encoder serial number
Range of the encoder serial number
Basic reference mark distance for distance-coded en‐
coders
Interval between two reference marks with distance-co‐
ded scales
Linear measuring system inverse to machine system
Distance-coded linear measuring system without des‐
tination point
Spindle speed tolerance
Encoder limit frequency resynchronization
Zero mark monitoring
Function Manual, 06/2019, A5E47437747B AA
Axes and spindles